1m Box Section Galvanised Steel Square Tube 25x25x2.6mm
A length of 1m (100cm) box/square section measuring 25x25mm, manufactured from galvanised steel.
Our box section tube is fully compatible with our range of 25x25mm tube clamps.
Available for sale in 1m, 1.5m, 2m, and 3m lengths.
| Info | Detail |
|---|
| Length |
1m (100cm) |
| Outside Diamater |
25x25mm |
| Wall Thickness |
2.6mm |
| Galvanised Coating |
50 micron approx |
| Specification |
S235 |
We can cut your steel tube to any size, add the cutting list at checkout and we’ll do the cutting for you. Our cutting service is free for up to 20 cuts after which, a charge will apply (min £15 excl. VAT.) Delivery charges can vary according to postcode & are calculated at checkout.
Our 25x25mm steel box section tube weighs approximately 1.97kg per meter.
Please note; due to the galvanising process a small hole may be drilled into a piece of the tube. This is part of the galvanising process and does not affect the strength of the tube. The hole can be completely covered by the tube clamps when using them, so it is not visible.
