1m Box Section Galvanised Steel Square Tube 40x40x2.5mm
A length of 1m (100cm) box/square section measuring 40x40mm, manufactured from galvanised steel.
Our box section tube is fully compatible with our range of 40x40mm tube clamps.
Also available for sale in 1.5m, 2m, 3m lengths.
This tube is also available in aluminium material.
| Info | Detail |
|---|
| Length |
1m (100cm) |
| Outside Diamater |
40x40mm |
| Wall Thickness |
2.5mm |
| Galvanised Coating |
50 micron approx |
| Specification |
S235 |
We can cut your steel tube to any size, add the cutting list at checkout and we’ll do the cutting for you. Our cutting service is free for up to 20 cuts after which, a charge will apply (min £15 excl. VAT.) Delivery charges can vary according to postcode & are calculated at checkout.
Our 40x40mm steel box section tube weighs approximately 2.7kg per meter.
Please note; due to the galvanising process a small hole may be drilled into a piece of the tube. This is part of the galvanising process and does not affect the strength of the tube. The hole can be completely covered by the tube clamps when using them, so it is not visible.
