Square Double Sided Fixed Bracket 198-B (25mm)
Tube Clamp or Pipe Clamps for 25x25mm box section. Complies with B.S. EN1461. And are also known by the term key clamps.
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting. We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Our tube clamps can be used to produce a wide range of handrails, furniture pieces, shop fittings, displays etc... By using square tube clamps you can beneift from a more unique design, which is much faster to assemble.
This clamp is suitable for our 25x25 box section available in galvanised steel finish or aluminium.
We also supply a wide range of tube clamp fittings in 33.7mm or 26.9mm round style tubes.
Allen keys to fasten this product can be found here.
| Info | Detail |
|---|
| Manufacturing Standard |
B.S. EN1461. |
| Material |
Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999) |
| Allen Key Size |
1/4 |
| Weight |
0.29kg |
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg.
